Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
This video is currently unavailable

The battery of the 2017 Toyota Yaris model vehicle is located inside the cabin, specifically the battery is located under the passenger seat. To replace the battery, it is necessary to remove the passenger seat, and to do this we just have to unscrew the bolts at the base of the seat and disconnect the airbag connector in this way we can easily remove the seat.

To replace the battery, we should then remove the nut that locks the body and then disconnect the negative terminal clamp and immediately after the positive terminal clamp. We insert the new battery and connect the positive terminal clamp first and then the negative terminal clamp.

We close the battery compartment cover and mount the seat.


Posted on 6 May 2025 by ScegliAuto


Related tutorials

Toyota Yaris (2005-2011 / Xp90) Start by inserting the tip of a flathead screwdriver into the slot on the side of your Toyota Yaris key and lever it open. Then, detach and remove th…
Toyota Yaris (2020-2026 / MK 4) Unlike many Toyota models, the Hybrid Yaris places the battery inside the vehicle. The battery of the Toyota Hybrid Yaris is located within the cabin…
Toyota Yaris (2011-2019 / Xp130) To replace the battery in a Toyota Yaris, open the bonnet to access the components in the engine bay. Once you locate the battery, loosen the screws …

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - How much does it cost to replace the batteries in the Toyota Yaris Hybrid in the UK? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos