Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to bypass the tire pressure sensor on the Toyota 4Runner

Model: Toyota 4runner N280 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Instrument cluster

See other generations:
Video tutorial

In this video we can see how to bypass the tire pressure sensor on the Toyota 4Runner, but in general on all Toyota vehicles. We will only need some connectors and a series of rather basic tools.

Under the glove compartment we find a screw, which we will remove, and which will lead us to a yellow wiring, where we just need to disconnect a small plastic tab at the top. It is not necessary to cut anything, but with the connectors we have obtained, we will only isolate the white and black wire and then the pink and black wire, connected by insulating tape, so that the light can no longer turn on. We do not see the usefulness of doing this operation, and thus giving up an important function of the vehicle; but if you want to do it, it is right to know how.


Posted on 14 July 2025 by ScegliAuto


Related tutorials

How to Reset the Tire Pressure Light on a Toyota 4Runner
How to Reset the Tire Pressure Light on a Toyota 4Runner
Toyota 4runner (2010-2024 / N280) In this brief guide, you will find instructions to reset the tire pressure light on a Toyota 4Runner. Before resetting the TPMS sensors, ensure that …
How do you reset the tire pressure light on the Toyota 4Runner?
How do you reset the tire pressure light on the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) You can completely remove the tire pressure warning light from the Toyota 4Runner instrument panel by inflating the tires to the recommended pressure…
How do you reset the tire pressure light on the Toyota 4Runner?
How do you reset the tire pressure light on the Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) It will be possible to completely reset the tire pressure warning light of the Toyota 4Runner by inflating the tires to the recommended pressure valu…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos