|
Do it yourself
| |||
| ||||
How to remove the right mirror of the Toyota Yaris XP130
Model: Toyota Yaris
Xp130
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
In this video, we can see how to remove the external rearview mirror of a Toyota Yaris XP130: we will have to remove the inner door panel, starting from the bolt located within the thickness of the door, then remove the window controls with a plastic spatula, and disconnect the electrical connectors that we will find underneath. We will also find a bolt to unscrew; then we will move to the inner handle, where we will remove the plastic partition that also covers a screw here. At this point, the panel will be free, and we just need to push it from below to remove it, after disconnecting other electrical connectors. Now we have exposed the two bolts for fixing the external rearview mirror, unscrew them and then remove the coverings of the mirror wiring; disconnect the connector and unscrew the fixing bolts. We will also unscrew the fixing bolts of the speaker, so that we can insert our hand into the hole we have created in order to remove the mirror cable. At this point, the mirror is removed.
Posted on 3 August 2025 by ScegliAuto
Related tutorials
Toyota Yaris
(2011-2019 /
Xp130)
To replace the external wing mirror on the Toyota Yaris, you must first remove the corresponding door panel. By loosening the bolt located inside the…
Toyota Yaris
(2011-2019 /
Xp130)
How to remove the external wing mirror of a Toyota Yaris (driver's side)? After removing the door panel or the internal cover of the mirror: unscrew …
Toyota Yaris
(2011-2019 /
Xp130)
In this guide, discover the instructions to remove and replace the external rear view mirror on a Toyota Yaris third series. First, get inside the ve…
Other guides you may be interested in
|
How to reset the Service light on a 2019 Jeep Renegade?
The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
