Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulb of a rear headlight of a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tail light bulb

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the bulb of a rear headlight of a Toyota Yaris car. Open the trunk of the car to locate the rear headlight that you will need to replace the bulb. Inside the trunk, on the side of the headlight, you will find a plastic panel that you will need to remove to access the bulb socket.

At this point, locate the bulb connector and rotate it a quarter turn counterclockwise and remove it from its socket. Remove the bulb by gently pulling it out and insert the new one. Put the bulb socket back in place and secure it by rotating it a quarter turn clockwise.

Finally, reposition the plastic cover panel that you had removed at the beginning.


Posted on 2 September 2025 by ScegliAuto


Related tutorials

How do you replace the rear headlight bulb of the Toyota Yaris?
How do you replace the rear headlight bulb of the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) In order to replace the rear headlight bulb of the Toyota Yaris, you need to open the rear hatch so that you have access to the side of the trunk whe…
How to Replace the Rear Tail Light Bulb on a Toyota Yaris?
How to Replace the Rear Tail Light Bulb on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To replace the rear tail light bulb on a Toyota Yaris, follow these steps. Start by opening the tailgate and locate the compartment behind which the …
Headlight Bulb Replacement for Toyota Yaris
Headlight Bulb Replacement for Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Are the headlight bulbs damaged? Let’s look at removing the front headlight bulbs from a Toyota Yaris. Lift the front bonnet of the car and secure it…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos