Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear bumper of the Toyota CH-R

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Rear bumper

See other generations:
Video tutorial

Today we will see the information that will allow us to disassemble and replace the rear bumper of the Toyota CH-R. First, we open the rear hatch of the trunk and start unscrewing the fixing screws we find on the top and bottom of the bumper; then we unscrew the fixing screws located on both sides of the rear wheel arches, until we release it and remove it completely, as shown in the video.

At this point, we install the new rear bumper, fixing it correctly (after any painting), following the video tutorial until the end!


Posted on 12 September 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a 2017 Toyota C-HR
How to Replace the Key Battery in a 2017 Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) If you need to replace the battery in your 2017 Toyota C-HR key but don’t know how to do it, follow the steps in this guide. First, take a flat screw…
What is the fuse diagram for the Toyota C-HR?
What is the fuse diagram for the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this video we can see where the fuse boxes of the Toyota C-HR are located and what are the respective diagrams, useful in case we need to check th…
How to Replace the Key Battery for the Toyota C-HR
How to Replace the Key Battery for the Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) If you need to replace the battery in your Toyota C-HR key yourself, follow the procedure described below step by step. First, purchase a new button …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos