|
Do it yourself
| |||
| ||||
Battery replacement for Toyota Yaris 1.3 VVT-i
Model: Toyota Yaris
Xp90
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011
Video tutorial
Shortly, we will see the instructions that will allow us to disassemble and replace the battery of the Toyota Yaris 1.3 VVT-i. First, we open the hood of the car and start unscrewing the screws of the battery bracket, which we find in the central part; once removed, we will disconnect both battery terminals (positive and negative), as shown in the video. At this point, we remove the battery from its compartment, replacing it with the new one (of the right type and with the same amperage); we reassemble the battery in the correct way, making the connection!
Posted on 11 October 2025 by ScegliAuto
Related tutorials
Toyota Yaris
(2005-2011 /
Xp90)
The following steps will show you the process for removing and replacing the battery of the Toyota Yaris 1.3 VVT-I. First, open the bonnet and start …
Toyota Yaris
(2005-2011 /
Xp90)
In this video, you will see how to remove and replace the battery on a second series Toyota Yaris VVT-i, following these simple instructions. First, …
Toyota Yaris
(2005-2011 /
Xp90)
Today, let's discover the main instructions on how to remove and replace the starter motor on the Toyota Yaris VVT-I. First, open the vehicle's bonne…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Frequently Asked QuestionsHow to Replace the Front Headlamp Bulb in a Kia Stonic?
Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |