Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Toyota Yaris 1.3 VVT-I Battery Replacement

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Battery

See other generations:
Video tutorial

The following steps will show you the process for removing and replacing the battery of the Toyota Yaris 1.3 VVT-I. First, open the bonnet and start by undoing the two securing nuts of the battery's central bracket; then disconnect both electrical connectors (positive and negative), as shown in the video.

At this point, remove the battery from its compartment and replace it with a new one of the correct type and same amperage; secure it properly in the correct orientation and reconnect the electrical connections, then start the engine!


Updated on 18 September 2026 by ScegliAuto


Related tutorials

Replacing the Battery on Toyota Yaris VVT-i
Replacing the Battery on Toyota Yaris VVT-i
Toyota Yaris (2005-2011 / Xp90) In this video, you will see how to remove and replace the battery on a second series Toyota Yaris VVT-i, following these simple instructions. First, …
Battery replacement for Toyota Yaris 1.3 VVT-i
Battery replacement for Toyota Yaris 1.3 VVT-i
Toyota Yaris (2005-2011 / Xp90) .. us to disassemble and replace the battery of the Toyota Yaris 1.3 VVT-i. First, we open the hood of the car and start unscrewing the screws of the battery.. …
How to Replace the Battery on a Toyota Yaris 1.0 VVT-i
How to Replace the Battery on a Toyota Yaris 1.0 VVT-i
Toyota Yaris (2005-2011 / Xp90) Today, let's go through the instructions for removing and replacing the battery on a Toyota Yaris 1.0 VVT-i. First, open the vehicle's bonnet and sta…

    Frequently Asked Questions

    • Yaris 2011-2019 - How much does it cost to replace the batteries in the Toyota Yaris Hybrid in the UK? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos