Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the reverse light bulb of the Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

Below we will discover the steps that will illustrate the process of disassembling and replacing the reverse light bulb of the Toyota Corolla. First, we open the rear hatch of the trunk and start removing the inner side cover, pulling away the bulb holder along with the reverse light; then we disconnect and remove the small bulb, as shown in the video.

At this point, we install the new reverse light bulb, of the correct type and with the same attachment; we reassemble the bulb holder and the plastic cover, checking its operation!


Posted on 14 November 2025 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Toyota Corolla
How to replace the headlight bulb of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following g…
Replacing the Dipped Beam Headlamp Bulb on a Toyota Corolla MK3
Toyota Corolla (2006-2013 / MK 3) If the dipped beam headlamp bulb on your Toyota Corolla stops working, you must replace it as soon as possible to drive safely in poorly lit areas. T…
How to Replace the Number Plate Bulb on a Toyota Corolla?
How to Replace the Number Plate Bulb on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To replace the number plate bulb on a Toyota Corolla, lift the tailgate. This will allow you to use a tool to detach the internal carpet lining of th…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos