Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Headlamp Bulb on a Toyota Corolla MK3

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
This video is currently unavailable

If the dipped beam headlamp bulb on your Toyota Corolla stops working, you must replace it as soon as possible to drive safely in poorly lit areas. To change the bulb, open the bonnet, position yourself in front of the headlamp containing the bulb to be changed, and from the inside, turn the back of the bulb a quarter turn and pull it out. Disconnect the electrical connector and remove it. Take a new H11 bulb, insert the connector, place it in its housing, and secure it by turning it. To avoid shortening the life of the bulb, do not touch the glass with your bare fingers.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb in a Toyota Corolla?
How to Replace the Front Headlight Bulb in a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Replacing the front headlight bulb in the Toyota Corolla is a very simple task; let’s see how to proceed in this video. First, ensure the key is not …
How to replace the headlight bulb of the Toyota Corolla
How to replace the headlight bulb of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following g…
Headlight Bulb Replacement for Toyota Corolla
Headlight Bulb Replacement for Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Are the headlight bulbs damaged? Let’s look at removing the front headlight bulbs from a Corolla. Lift the front bonnet of the car and secure it. Rem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos