|
Do it yourself
| |||
| ||||
How to reset the service of the Toyota Aygo
Model: Toyota Aygo
Ab40, MK 2
- Years 2014-2023
On the Toyota Aygo, the maintenance warning can be reset directly from the dashboard. With the vehicle stationary and the engine off, turn the ignition to ON and follow the procedure indicated on your dashboard: if there is an ODO/TRIP button, set it to ODO or TRIP A (as shown on the screen), press and hold ODO/TRIP, then turn the ignition to ON without starting the engine and keep holding it until the countdown finishes and the warning disappears. If your Aygo has a menu in the multifunction display (gear icon), go to Settings ? Maintenance/Scheduled Maintenance and select Reset, confirming when prompted. Once completed, the counters will be updated; to verify, return to the maintenance section and check the new deadline. If the procedure is not accepted, repeat it, making sure to follow the exact sequence and the highlighted buttons on the screens.
Posted on 9 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Aygo
(2021-2026 /
MK 3, Aygo X)
Today we will discover the information that will show us how to reset the tire pressure warning light of the Toyota Aygo X; before resetting the TPMS…
Toyota Aygo
(2014-2023 /
Ab40, MK 2)
This guide will show you the steps to reset the maintenance service light on the Toyota Aygo. First, get in the vehicle and press and hold the reset …
Toyota Aygo
(2014-2023 /
Ab40, MK 2)
The instructions below will show us how to adjust the clutch pedal of the Toyota Aygo, in simple steps. First, we get on board the car and start chec…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.289
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |