Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the Toyota RAV4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Service warning light

See other generations:
Video tutorial

In this article, we will see how to reset the maintenance light on the Toyota Rav 4. We recommend performing the reset procedure only after having the vehicle serviced. To reset the light, you need to insert the key into the ignition without turning it. After inserting the key, press and hold the button located on the left side of the dashboard, while keeping it pressed, turn on the ignition and wait for the reset to occur.

When the light turns off, it means the reset is complete, and you can then restart the ignition to verify that the reset procedure was successful.


Posted on 23 January 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on Toyota RAV 4?
How to Reset the Service Light on Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) You can completely clear the Service light on the Toyota RAV 4 from the instrument cluster by activating the instrument panel and navigating through …
How to Reset the Service Light on a Toyota RAV 4?
How to Reset the Service Light on a Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To reset the Service light on a Toyota RAV 4, turn on the ignition and navigate through the menu using the controls on the left side of the steering …
How to Reset the Maintenance Light on a Toyota RAV 4 Hybrid
How to Reset the Maintenance Light on a Toyota RAV 4 Hybrid
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this video, see how to reset the maintenance light on a Toyota RAV 4 Hybrid. Without pressing any pedals, press the ignition button just enough to…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos