Do it yourself
Frequently asked questions about cars and motorcycles

How to reprogram the key of the Toyota Aygo (but also of the Citroen C1 and the Peugeot 107)

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Key

In this video we can see the procedure for programming the key/remote of the Toyota Aygo, but also of the Citroen C1 and the Peugeot 107, which are essentially the same car. We need to have the door open. So we put the key in the ignition, turn it on and off, then close, open, close, and open the door again. We repeat the sequence: turn it on and off, then close, open, close, and open, and then close the door. We press the door lock from the inside, then turn the ignition on and off again, and remove the key. We pull up the lock from the inside of the door, and try to cycle with the remote, opening and closing with it; if it doesn't work, we turn it on and off again while removing the key, open and close the door. Now it will work!

Posted on 24 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Aygo (2005-2014 / MK 1, Ab10) Today's guide shows important instructions for refuelling your Toyota Aygo, as well as the Citroen C1 and Peugeot 107. First, position yourself at th…
Toyota Aygo (2005-2014 / MK 1, Ab10) In this video, we see how to resynchronize the remote control of a Toyota Aygo, as well as a Citroen C1 or Peugeot 107. Keep the remote control in th…
Toyota Aygo (2014-2023 / Ab40, MK 2) In this video we can see how to replace the rearview mirror of a Toyota Aygo (but also of a Citroen C1 or a Peugeot 107). We can find the primed mirr…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos