Do it yourself
Frequently asked questions about cars and motorcycles

Key re-synchronization procedure for Toyota Aygo (also Citroen C1 and Peugeot 107)

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

In this video, we see how to resynchronize the remote control of a Toyota Aygo, as well as a Citroen C1 or Peugeot 107. Keep the remote control in the car: we must operate with the driver's door open, then turn the key to "on" and then back to "off"; close the door and then immediately reopen it, close it again and then reopen it leaving it open.

Turn on the car again and then turn it off again and repeat the door procedure: close it and reopen it, then close it and reopen it, and close it again.

Manually lock the door, turn the ignition on and off again; unlock the door. Take the remote control, press the button, and it should close and open the door.


Posted on 18 November 2025 by ScegliAuto


Related tutorials

Toyota Aygo (2005-2014 / Ab10, MK 1) In this video we can see the procedure for programming the key/remote of the Toyota Aygo, but also of the Citroen C1 and the Peugeot 107, which are e…
Toyota Aygo (2005-2014 / Ab10, MK 1) Today's guide shows important instructions for refuelling your Toyota Aygo, as well as the Citroen C1 and Peugeot 107. First, position yourself at th…
Toyota Aygo (2005-2014 / Ab10, MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the front headlight and its bulbs of the Toyota Aygo, as wel…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos