Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Tow Bar on the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

Today's instructions will show you how to install the rear tow bar on the Toyota Yaris. To install the tow bar, first remove the rear bumper by unscrewing all the fastening screws located at the back and on both sides of the wheel arches.

Then, install the approved tow bar onto the rear chassis, securing it with the bolts provided in the kit, as shown in the video. Once installed, reattach the rear bumper, securing it correctly by applying the reverse procedure!


Posted on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Blade on the Toyota Yaris
How to Replace the Rear Wiper Blade on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Replacing the rear wiper blade on a Toyota Yaris is a very simple and quick task to do yourself. Lift the wiper arm and position the blade horizontal…
How to Install a Spoiler on a Toyota Yaris
How to Install a Spoiler on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) If you want to install a spoiler on your Toyota Yaris to give your vehicle a more aggressive or sporty look, follow the advice of our Malaysian frien…
How to Change the Front Tweeters on a Toyota Yaris XP 90
How to Change the Front Tweeters on a Toyota Yaris XP 90
Toyota Yaris (2005-2011 / Xp90) In this video, see how to change the front tweeters on a Toyota Yaris XP90: first, for safety, disconnect the negative terminal, then remove the side…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos