Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Front Seat of the Toyota Celica

Model: Toyota Celica T230 - Years 1999-2006
Part: Seat

Today, let’s discover the main instructions for removing the front seat of the Toyota Celica. First, open the front door of the vehicle and begin unscrewing all the fastening screws found on the front seat rails, moving the seat back and forth to access them. Next, disconnect the electrical connector located under the seat, removing it from the cabin as shown in the video. At this point, carry out the repair or replacement of the front seat, securing it and adjusting it as necessary.

Posted on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seats in the Toyota Celica?
How to remove the front seats in the Toyota Celica?
Toyota Celica (1993-1999 / T200) In this tutorial we can see how to disassemble the front seats in the Toyota Celica, an extremely simple and quick operation. Before proceeding, open…
How to disassemble the front headlights of the Toyota Celica
How to disassemble the front headlights of the Toyota Celica
Toyota Celica (1999-2006 / T230) In this guide we will see the instructions that will allow us to dismantle the front headlights of the Toyota Celica. First, open the hood of the car…
How to Remove the Front Bumper of the Toyota Celica
How to Remove the Front Bumper of the Toyota Celica
Toyota Celica (1999-2006 / T230) To remove the front bumper of the Toyota Celica, open the bonnet to access the screws securing the bumper at the top. Once these screws are loosened,…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos