Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlights of the Toyota Celica

Model: Toyota Celica T230 - Years 1999-2006
Part: Headlight

In this guide we will see the instructions that will allow us to dismantle the front headlights of the Toyota Celica. First, open the hood of the car and start unscrewing the fastening screws of the front bumper, located on the top and on the wheel arch; gently release the bumper on the sides to detach it and remove it, as shown in the video. Now it will be possible to access the headlight screws, so we unscrew them; disconnect the electrical connector of the lights, removing the optical group. Replace the headlight bulbs or the entire headlight, finally checking its correct operation!

Posted on 25 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seats in the Toyota Celica?
How to remove the front seats in the Toyota Celica?
Toyota Celica (1993-1999 / T200) In this tutorial we can see how to disassemble the front seats in the Toyota Celica, an extremely simple and quick operation. Before proceeding, open…
Guide to Removing the Front Seat of the Toyota Celica
Guide to Removing the Front Seat of the Toyota Celica
Toyota Celica (1999-2006 / T230) Today, let’s discover the main instructions for removing the front seat of the Toyota Celica. First, open the front door of the vehicle and begin uns…
How to dismantle the roof headliner of the Toyota Celica
How to dismantle the roof headliner of the Toyota Celica
Toyota Celica (1999-2006 / T230) Today's instructions will allow us to disassemble and replace the headliner or interior roof lining of the Toyota Celica. First, we get inside the ca…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos