Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front seats in the Toyota Celica?

Model: Toyota Celica T200 - Years 1993-1999
Part: Seat

In this tutorial we can see how to disassemble the front seats in the Toyota Celica, an extremely simple and quick operation. Before proceeding, open the hood and disconnect the negative terminal of the battery, in order to avoid accidental activation of the airbags. Start by moving the seat in question completely backwards, then locate the two front bolts of the brackets and unscrew them using a 13mm socket wrench. Then move the seat forward, unscrew the two additional bolts, and disconnect the connector located under the seat. At this point, all that's left is to remove the seat from the cabin.

Posted on 15 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats of the Toyota Celica
How to Remove the Rear Seats of the Toyota Celica
Toyota Celica (1999-2006 / T230) In today's tutorial, we will guide you on how to remove the rear seats of the Toyota Celica, following these simple and quick steps. First, open the …
How to disassemble the front headlights of the Toyota Celica
How to disassemble the front headlights of the Toyota Celica
Toyota Celica (1999-2006 / T230) In this guide we will see the instructions that will allow us to dismantle the front headlights of the Toyota Celica. First, open the hood of the car…
How to Remove the Fuel Pump Float from a Toyota Celica
How to Remove the Fuel Pump Float from a Toyota Celica
Toyota Celica (1999-2006 / T230) Let's see how to remove the fuel pump float from a Toyota Celica. First, disconnect the battery cables, then fold down the rear seats of the car. You…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos