Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the bonnet in the Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Checks and maintenance

In this tutorial, you will learn how to open the bonnet in the Toyota Aygo, a very simple operation that follows the standard procedure of most vehicles. First, unlock the latches using the remote control, then open the driver's door, locate the lever on the lower left side of the cabin, and pull it towards you. Next, move to the front of the vehicle, find the second lever just above the Toyota logo, and push it to the left. At this point, simply open the bonnet fully and support it with the prop rod. To close it, gently let it fall.

Posted on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of the Toyota Aygo
How to Open the Bonnet of the Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) In today's tutorial, you will learn how to open the bonnet of the Toyota Aygo in simple and quick steps. First, access the front passenger compartmen…
How to Open the Bonnet on the Toyota Aygo?
How to Open the Bonnet on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) In this tutorial, we will see how to open the bonnet on the Toyota Aygo, a very simple operation that follows the typical procedure for most vehicles…
How to Open the Bonnet on a Toyota Aygo?
How to Open the Bonnet on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) In this tutorial, you will learn how to open the bonnet of a Toyota Aygo, in case you need to top up the coolant, windscreen washer fluid, or perform…

    Frequently Asked Questions

    • Aygo 2005-2014 - Where is the fuel tank of a Toyota Aygo located? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos