Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on the Toyota Hilux

Model: Toyota HiLux An130, An120, MK 8 - Years 2015-2024
Part: Service warning light

Let's briefly go through the steps to reset the service light for the regular maintenance oil change on the Toyota Hilux. First, get in the vehicle and press and hold the reset button located at the bottom right of the instrument cluster. Turn the key to the first position to power on the cluster, and wait for the countdown to complete, as shown in the video. At the end of the procedure, you will see that the service light and maintenance message have been reset correctly. Turn off the instrument cluster and then start the engine!

Posted on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Toyota Hilux
Resetting the Service Light on the Toyota Hilux
Toyota HiLux (2015-2024 / An130, An120, MK 8) This guide provides instructions to reset the service light for routine maintenance on the Toyota Hilux. First, get in the vehicle and turn on the ig…
Resetting the service light on the Toyota Hilux 2.4 D-4D.
Resetting the service light on the Toyota Hilux 2.4 D-4D.
Toyota HiLux (1997-2005 / N150, N160, N140, N170) These simple steps will show us how to reset the service light for the regular maintenance of the engine oil in the Toyota Hilux 2.4 D-4D. First of a…
How to Reset the Service Light on the Toyota Hilux?
How to Reset the Service Light on the Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) You can reset the Service light displayed on the instrument panel of the Toyota Hilux by pressing and holding the button located at the bottom center…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos