Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

You can clear the tyre pressure warning light on a Toyota Corolla by inflating the tyres to the optimal pressure value: this value will be indicated on the sticker affixed to the driver's door pillar. After inflating the tyres, turn on the instrument panel and locate the SET button that allows the light to turn off: this will be found under the steering column.

By holding it down for a few seconds, you will notice that the light will turn off, and you can then also turn off the ignition.


Posted on 29 August 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Toyota Corolla?
How to reset the tyre pressure warning light on the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To reset the tyre pressure warning light on the Toyota Corolla, first inflate the car's tyres to the recommended pressure value: this value is indica…
How do you reset the tire pressure light on the Toyota Corolla?
How do you reset the tire pressure light on the Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) The tire pressure warning light on the Toyota Corolla's instrument panel can be reset by first inflating the tires to the recommended pressure value,…
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) To reset the tyre pressure warning light on a Toyota Corolla, turn the ignition on by rotating the key in the ignition switch. Once the dashboard is …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos