Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight Bulb on Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight bulb

See other generations:
Video tutorial

Replace the blown bulbs in the front lights of your Toyota Yaris. Start by opening the front bonnet and removing the plastic cover (if fitted behind the light).

Once the cover is removed, disconnect the power connector and take out the blown bulbs. Replace them with new bulbs (same size and voltage).

Test the bulbs by entering the vehicle and turning on the car lights using the control lever. Refit the headlight cover and then lower the front bonnet.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
Toyota Yaris (2020-2026 / MK 4) To replace the headlight bulb on the Toyota Yaris Hatchback, open the bonnet to access the interior of the corresponding headlight. Here, disconnect …
How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…
How to replace the front headlight bulb of the 2010 Toyota Yaris
How to replace the front headlight bulb of the 2010 Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) When the front headlight bulb stops working, the causes can be a malfunction of the fuse, a malfunction of the connector, or a burnt-out bulb. To rep…

Other guides you may be interested in

How to reset the service light on a Lancia Ypsilon?

When the service light comes on in a Lancia Ypsilon, as with any vehicle, it indicates that the car needs servicing, including an oil change and oil filter replacement. The vehicle shown in the video, the Lancia Ypsilon, can be easily maintained by yourself; changing the engine oil is not a complex task, nor is resetting the aforementioned light. Here’s the reset procedure: Turn on the ignition, press the accelerator pedal down, and press the brake pedal seven times. After this, wait sixty seconds, release the accelerator, and turn off the ignition. Reset completed.

Watch the video!


by ScegliAuto

More videos