Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the 2010 Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Headlight bulb

When the front headlight bulb stops working, the causes can be a malfunction of the fuse, a malfunction of the connector, or a burnt-out bulb. To replace the bulb on a 2010 Toyota Yaris, we need to open the front hood and remove the dome light cover, disconnect the connector by pressing on the sides of the head after disconnecting the power, remove the bulb. Insert the new bulb into the headlight, and after connecting the connector, close the dome light cover. Repeat the same operation if necessary on the left headlight, then turn on the car lights to test the bulbs.

Posted on 12 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…
How to Replace the Front Headlamp Bulb on a Toyota Yaris
How to Replace the Front Headlamp Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To replace the front headlamp bulb on a Toyota Yaris, open the bonnet to access the components inside the engine bay. Locate the circular protective …
How to replace the front headlight of the Toyota Yaris
How to replace the front headlight of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today we will explain how to replace the front headlight of the Toyota Yaris car. Before replacing the headlight, it is necessary to remove the front…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos