Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Light on Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Interior dome light bulb

See other generations:
Video tutorial

As with almost all car models, to remove the interior light, simply insert a small flat screwdriver between it and the headlining. While doing this, be careful not to damage the headlining itself, so if you feel at risk with the screwdriver, use a plastic wedge.

On this car model, at the back of the interior light, there are two clips: lever them to make it easier. Once removed, it will be easy to take off the small rear cover, extract the burnt-out bulb, and insert the new one. Reinsert the interior light and you're done.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Removing the Bulb from the Ceiling Light on a Toyota
Removing the Bulb from the Ceiling Light on a Toyota
Toyota Corolla (1995-2002 / MK 1) Need to remove the damaged bulb from inside the ceiling light? Start by removing the bulb from inside the light unit. Pry between the cover of the ce…
How to Replace the Interior Light Bulb on a Toyota Corolla?
How to Replace the Interior Light Bulb on a Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) To replace the interior light bulb on a Toyota Corolla, use a tool to lever the light fitting away from its housing. Once removed, you can locate the…
Replacing the Interior Dome Light Bulbs on the Toyota Corolla MK3
Replacing the Interior Dome Light Bulbs on the Toyota Corolla MK3
Toyota Corolla (2006-2013 / MK 3) In this video, you will discover how to replace the interior dome light bulbs on the third series Toyota Corolla, as well as on the Auris. First, get…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos