Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Panel on a Toyota Rav 4

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Here’s how to remove the rear panel and associated parts on a Toyota Rav 4. Disconnect the battery terminals before removing the door panel. Remove the cover of the internal handle: unscrew the screws inside it. Take out the switch panel from inside the handle, unscrew the remaining screws on the door panel, and detach the securing clips.

Pull the panel away by hand and disconnect it from the door (unplug the power wiring and the opening cable). Carry out the desired maintenance inside the door.

Refit the previously removed cover panel or replace it with a new one.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Toyota Corolla
How to Remove the Rear Door Panel of a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Before you begin, open the rear door of your Toyota Corolla. Start by disengaging and removing the inserts from the door panel. Once done, unscrew an…
How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
How to remove the door panel of the Toyota Corolla?
How to remove the door panel of the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To remove the door panel of the Toyota Corolla, loosen the screw located inside the armrest after removing the plastic protective cap. Perform the sa…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos