Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Light on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: License plate light

See other generations:
This video is currently unavailable

Open the boot of the car and use a plastic trim tool (not metal!) to detach the black internal cover. Do this slowly and gently, removing it from the housing piece by piece.

As shown in the video, disconnect the hidden connector in the metal panel using a screwdriver (or the trim tool). Now you can extract the bulb with its holder.

This will not be replaced but reused, changing only the bulb which you need to detach from the housing. Insert the new bulb and reassemble everything in reverse order: first the connector and then the internal plastic of the boot.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to replace the license plate light bulb on a Toyota Yaris
How to replace the license plate light bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Replacing the license plate light bulb on a 2010 Toyota Yaris is a very simple and quick operation to perform. We begin the replacement by removing t…
How to replace the number plate bulb in the Toyota Yaris
How to replace the number plate bulb in the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) These brief and simple instructions will show you how to remove and replace the number plate lights in the Toyota Yaris. First, move to the rear of t…
In the Toyota Yaris 2, how do you replace the license plate light?
Toyota Yaris (2005-2011 / Xp90) This can easily be defined as a simple job within everyone's reach, that of replacing the license plate light, not only for the Toyota Yaris 2, but f…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos