Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light bulb on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: License plate light

See other generations:
Video tutorial

Replacing the license plate light bulb on a 2010 Toyota Yaris is a very simple and quick operation to perform. We begin the replacement by removing the license plate, to do this you will need to remove the four plastic pins.

We continue by unscrewing the screws on the sides and then removing the bulb inside by disconnecting it from the connector. We conclude the replacement by inserting the new bulb and reassembling the license plate.

We turn on the vehicle to make sure the light is working, if not, check the status of the corresponding fuse and replace it with one of the same amperage if necessary.


Posted on 15 January 2025 by ScegliAuto


Related tutorials

How to replace the license plate bulbs of the Toyota Yaris
How to replace the license plate bulbs of the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) In this guide we will see the instructions that will allow us to disassemble and replace the license plate lights of the Toyota Yaris. First, we open…
In the Toyota Yaris 2, how do you replace the license plate light?
Toyota Yaris (2005-2011 / Xp90) This can easily be defined as a simple job within everyone's reach, that of replacing the license plate light, not only for the Toyota Yaris 2, but f…
How to Replace the Number Plate Bulb on a Toyota Yaris
How to Replace the Number Plate Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video, see how to replace the damaged number plate bulb fitted on a Toyota Yaris. Use a screwdriver to remove the number plate light unit loc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos