Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on a Toyota Aygo, first ensure all four tyres are at the correct inflation pressure. Once done, turn on the ignition to check if the warning light is illuminated.

To reset it, open the glove compartment on the passenger side and press and hold the button indicated by the tyre pressure symbol and the word SET, which is black in colour, for a few seconds. After holding it for a few seconds, the light that was illuminated on the display will have been reset correctly.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Resetting the tire pressure warning light on the Toyota Aygo
Resetting the tire pressure warning light on the Toyota Aygo
Toyota Aygo (2021-2026 / MK 3, Aygo X) The activation of the tire pressure warning light indicates a possible puncture in one or more tires; let's see how to reset the TPMS sensors on the …
How to reset the tire pressure warning light on the Toyota Aygo X.
How to reset the tire pressure warning light on the Toyota Aygo X.
Toyota Aygo (2021-2026 / MK 3, Aygo X) These brief and simple steps will allow us to reset the tire pressure warning light on the Toyota Aygo X after restoring the pressures on all four ti…
How do you reset the tire pressure light on the Toyota Aygo X?
How do you reset the tire pressure light on the Toyota Aygo X?
Toyota Aygo (2021-2026 / MK 3, Aygo X) To reset the tire pressure warning light on the Toyota Aygo X, you need to inflate the tires until they reach the recommended pressure value: this wi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos