Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Light on a Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years 2019-2026
Part:

Resetting the tyre pressure warning light on a Toyota Corolla is very simple, and now we will demonstrate it. Turn on the ignition and observe the screen to your right, next to the speedometer. Scroll through the various sections of the menu on that screen until you reach the vehicle settings page. Enter that section and then click on TPWS. Once you are on that page related to tyre pressure, click on "adjust pressure" while holding the "ok" button for a few seconds. Remember that before performing the reset, it is essential to check the condition of the tyres.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Toyota Corolla
Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Today we will discover the steps to reset the tyre pressure monitoring system light on a Toyota Corolla; before recalibrating the TPMS sensors, ensur…
How to reset the tire pressure light on a Toyota Corolla?
How to reset the tire pressure light on a Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) To reset the tire pressure warning light on a Toyota Corolla, turn on the instrument panel without starting the engine. Locate the tire pressure rese…

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos