Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Tyre Pressure Light on C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

How to reset the tyre pressure light? Let's see how to reset the light after turning on the instrument cluster of the Toyota C-HR. Turn on the instrument cluster with the dedicated key (you will see the maintenance light illuminated) and press the buttons to scroll through the settings menu.

Press the centre button to confirm the maintenance (the message 'maintenance completed' will appear).

If the light does not turn off, you can inflate one of the tyres with compressed air (the light will then turn off). Check all the information displayed in the car's settings menu (information display). Repeat the procedure if it was not successful.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on a Toyota CH-R
How to reset the tyre pressure warning light on a Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) The steps in this guide will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota CH-R. Before performing the reset, …
Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Toyota C-HR
Resetting the Tyre Pressure Monitoring System (TPMS) Light on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Let's discover how to reset the tyre pressure warning light on a Toyota C-HR; before performing the recalibration of the TPMS sensors, ensure that al…
Toyota C-HR Reset Tyre Pressure Light
Toyota C-HR Reset Tyre Pressure Light
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Do you want to reset the tyre pressure light? Let's see how to reset the light after turning on the instrument cluster. Turn on the instrument cluste…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos