Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Bumper on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Rear bumper

Open the boot door and unscrew the two 10 mm bolts securing the rear bumper near the lights using a socket wrench. Remove the plastic clips that hold the lower part of the bumper in place using a dedicated pliers. Using a flat screwdriver or a plastic lever, pry all around the bumper, inserting these tools into the gaps between the bumper and the rest of the bodywork, detaching the bumper bit by bit until it completely comes off. As you can see, it is a very simple operation. Proceed in reverse for reassembly.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper of the Toyota Yaris
How to remove the rear bumper of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Removing the rear bumper of the Toyota Yaris produced from 1999 to 2005 is a very simple and quick operation to perform independently. To carry out t…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos