Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Camry
    4. : How to reset Toyota Camry oil warning light

Toyota Camry - Video tutorial

Model: Toyota Camry Xv40 - Years 2006-2013
Part: -board computer
Operation: How to reset Toyota Camry oil warning light

Inside the car there are several sensors capable of promptly alerting the driver in case of need for maintenance. Among these we also find that relating to the oil change. It may happen that this sensor presents detection problems and as a result an alarm light appears on the on-board computer display. To reset everything you need to insert the key and turn on the ignition. Locate the small button located in the lower right area of the dashboard, just below the fuel gauge. Press it once and turn off the ignition. Then hold down the same button for a few seconds and turn the ignition on at the same time. Release the button and turn off the ignition one last time. The reset was successful.


Posted on 31 March 2024 by ScegliAuto



How to reset the Toyota Camry oil light
Toyota Camry (2002-2006 / Xv30) In this new mini guide of ours dedicated to all of you owners of a Toyota Camry XV 30 we are going to find out how to correctly reset the engine oil
How to reset the oil light on a 2017 Toyota Camry.
Toyota Camry (2011-2019 / Xv50) To complete the oil warning light reset for your 2017 Toyota Camry manually and independently, simply follow these steps. First, enter the vehicle an
How to reset Toyota Camry 2012 tire warning light
Toyota Camry (2006-2013 / Xv40) To be able to properly reset the tire warning light that comes on steadily on the instrument panel of your 2012 Toyota Camry it takes a few simple st

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos