Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Trip A/B Counters on the Toyota RAV 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

The Trip A and Trip B counters on the Toyota RAV 4 refer to the partial kilometres travelled and complement the classic ODO (total kilometres travelled) for an accurate overview of the distance covered with your car. To reset both values, simply perform a straightforward reset procedure.

First, insert the key and turn on the vehicle's ignition.

Next, locate the button below the rev counter and press it several times until you see the Trip A display on the mini screen. At this point, hold it down and release it as soon as the value returns to 0. Do the same for the Trip B counter, and you're done.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to reset the trip mileage on the Toyota RAV4.
How to reset the trip mileage on the Toyota RAV4.
Toyota Rav 4 (2019-2026 / MK 5, Xa50) The instructions in this guide will show us how to reset the trip meter of the Toyota RAV4. First, let's get inside the vehicle and start the engine;…
How to Reset the Service Light on a 2007 Toyota RAV4
How to Reset the Service Light on a 2007 Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) If you want to postpone the service date for your Toyota RAV4 or if you have just completed it and want to get rid of the warning light, simply follo…
How to reset the service light in the Toyota Rav 4
How to reset the service light in the Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To correctly reset the service light in your Toyota Rav 4, the steps are very simple and quick. First, press the start button twice. Then, using the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos