Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the Toyota Venza

Model: Toyota Venza MK  1, Av10 - Years 2008-2017
Part: Headlight bulb

In this video, we will see how to disassemble and replace the headlight bulb on the Toyota Venza by following these simple steps. First, open the hood and begin removing the screws and clips found on the top and bottom of the bumper. Unscrew the additional screws located on both sides of the front wheel wells, as shown in the video. Once the bumper is removed, unscrew the screws of the headlights and take them out. Disconnect the electrical connectors from the bulbs to remove them and replace them with new ones of the correct type and with the same fitting!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Toyota Venza
How to Replace the Headlight Bulb on a Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) To replace the headlight bulb on a Toyota Venza, open the hood to access the components inside the engine compartment. Locate the protective cover in…
How to Replace the Headlight Bulb on a Toyota Venza?
How to Replace the Headlight Bulb on a Toyota Venza?
Toyota Venza (2008-2017 / MK  1, Av10) To replace the headlight bulb on a Toyota Venza, open the hood to access the components located at the back of the corresponding headlight. Here, dis…
How to Replace the Headlight Bulb on a Toyota Venza
How to Replace the Headlight Bulb on a Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) To replace the headlight bulb on a Toyota Venza, open the hood to access the components at the back of the corresponding headlight. Disconnect the co…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos