Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : How to reset from the Toyota Auris 2016 on-board computer

Toyota Auris - Video tutorial

Model: Toyota Auris E180 - Years 2012-2018
Part: -board computer
Operation: How to reset from the Toyota Auris 2016 on-board computer

In this video we show you how to reset the Toyota Auris 2016 on-board computer. This is a very simple operation. Turn on and the instrument cluster. Then hold down the button located on the far right of the steering wheel called TRIP; keep it pressed until a flashing dashed line appears on the display which will decrease more and more until it is completely reset. When the item on the display stops at zero, release the button and turn off the electrical panel. After waiting a few seconds, turn the instrument panel back on and you will see that the reset has been carried out.


Posted on 3 May 2024 by ScegliAuto



How to adjust the time of the Toyota Auris
Toyota Auris (2018-2024 / E210) .. on the instrument panel; then let's go to the on-board computer settings, from the central display, as shown in the video. At this point let's go to the..
Auris pressure reset
Toyota Auris (2007-2012 / E150) .. Always remember to make changes to the on-board computer with the vehicle stopped and turned off. We close the glove compartment at the end of..
How do you reset the Service light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) .. Once the panel is on, navigate through the onboard computer menu by repeatedly pressing the TRIP button located on the right side of the steering..

Other guides that may interest you

    Frequently Asked Questions

    • Auris 2012-2018 - Why isn't the hybrid system of the Toyota Auris working? Read Answer
    • Auris 2012-2018 - What does the Toyota Auris engine light indicate? Read Answer

How to open the seat of a scooter without the key

If we have to open the saddle on a scooter when we do not have the key, we can find the necessary information and useful information on how to move in the description below and also in the video. The saddle is normally opened by inserting the key in the dashboard and pressing the appropriate control. If we do not have the key available, we can still open it by removing the panel which is placed immediately under the saddle where we rest our feet and intercept the opening cable and then pull it manually. This way the saddle will open.

Watch the video!


by ScegliAuto

More videos