Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tyre pressure warning light on the Toyota Auris?

Model: Toyota Auris E180 - Years 2012-2018
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Toyota Auris, turn on the instrument panel after all tyres have been inflated to the correct pressure: once the tyres are inflated, open the glove compartment on the passenger side. Inside, locate the button that allows you to reset the tyre pressure warning light: press and hold it until the tyre light resets, then close the glove compartment and turn off the instrument panel.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the Toyota Auris, turn the ignition on without starting the engine. Next, open the glove compartment loca…
Toyota Auris (2012-2018 / E180) This guide explains how to reset the tyre pressure monitoring system (TPMS) warning light on a Toyota Auris. Before performing the reset, ensure all …
Toyota Auris (2012-2018 / E180) You can completely turn off the tire pressure warning light that appears on the instrument panel of the Toyota Auris by turning the key to activate t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos