Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure on the Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part:

It is often easy to overlook the pressure in our tyres, especially when that red warning light stays on after replacing a tyre, or if one of them is flat. Don’t worry, today you will receive some useful tips and the solution to turn off the light that indicates the pressure in your tyres. First, turn on the ignition of your vehicle, in this case, as described for the Toyota Yaris, and bending down towards the pedals, you will notice a button near the fuse box that needs to be pressed for a few seconds to make the warning light disappear from your dashboard.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Toyota Yaris
Resetting the Tyre Pressure Warning Light on the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) In this guide, we will discover how to reset the tyre pressure warning light on the Toyota Yaris; before resetting the TPMS sensors, ensure that all …
How to reset the tire pressure light on the Toyota Yaris
How to reset the tire pressure light on the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) These short and simple instructions will show us the process of resetting the tire pressure warning light (TPMS) of the Toyota Yaris; before performi…
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Below is the procedure to reset the tyre pressure warning light on the Toyota Yaris. Before resetting the TPMS, ensure all four tyres are at the corr…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What to do in case of tire warning light on Toyota Yaris? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos