Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight Assembly on the Toyota Rush

Model: Toyota Rush J300, F800 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight

See other generations:
Video tutorial

If you need to remove the front headlight assembly on this vehicle, you can find the instructions on how to proceed in the description below and refer to the video. After opening the hood, you will need to remove the front bumper by unscrewing the screws located above the grille and then disengaging the clips in the wheel well.

Next, locate the screws around the headlight assembly that you need to remove and proceed to unscrew them. After that, you can extract the headlight by pulling it towards you while being careful to disconnect the connectors at the back.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Toyota Rush?
How to Replace the Spark Plugs on a Toyota Rush?
Toyota Rush (2017-2024 / J300, F800) To replace the spark plugs on a Toyota Rush, open the hood to remove the plastic cover from the top of the engine block. This will give you access to…
How to Replace the Air Filter in the Toyota Rush?
How to Replace the Air Filter in the Toyota Rush?
Toyota Rush (2006-2017 / J200, F700) To replace the air filter in the Toyota Rush, open the hood to access the box located just below the windshield. You can open the box by releasing th…
How to Replace the Cabin Air Filter on the Toyota Rush
How to Replace the Cabin Air Filter on the Toyota Rush
Toyota Rush (2017-2024 / J300, F800) In this brief guide, learn how to replace the cabin air filter on the Toyota Rush. First, get inside the vehicle on the passenger side and begin remo…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos