Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Toyota Rush?

Model: Toyota Rush J300, F800 - Years 2017-2024
Part: Spark plugs

To replace the spark plugs on a Toyota Rush, open the hood to remove the plastic cover from the top of the engine block. This will give you access to the wires connected to the injectors, which must be disconnected, and the mounting screws for the injectors should be loosened. This will allow you to pull out the injectors and remove the underlying spark plugs using a socket wrench. After the old spark plugs are removed, you can install the new ones and reassemble all previously removed components.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on the Toyota Rush?
How to Replace the Spark Plugs on the Toyota Rush?
Toyota Rush (2017-2024 / J300, F800) To replace the spark plugs on the Toyota Rush, open the hood to access the components at the top of the engine block; here, next to the air filter bo…
How to Replace the Cabin Filter on the Toyota Rush?
How to Replace the Cabin Filter on the Toyota Rush?
Toyota Rush (2017-2024 / J300, F800) To replace the cabin filter on the Toyota Rush, open the glove compartment located on the passenger side to release the side retaining pins inside. O…
How to Set the Time on the Toyota Rush
How to Set the Time on the Toyota Rush
Toyota Rush (2017-2024 / J300, F800) In this new mini guide for the Toyota Rush Mk2, we will discover how to manually change the displayed system time. This is a very simple operation, a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos