Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber in a Toyota Rush?

Model: Toyota Rush J300, F800 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Shocks

See other generations:
Video tutorial

To replace the rear shock absorber in a Toyota Rush, lift the vehicle with a jack or lift so that the corresponding wheel is off the ground: this will allow you to secure the suspension component and access the shock absorber located behind the wheel.

By removing the two bolts at the top and bottom of the shock absorber, you can take it out of its mount and replace it with a new one. After the replacement, lower the vehicle to ensure it is functioning properly.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on the Toyota Rush?
How to Replace the Cabin Filter on the Toyota Rush?
Toyota Rush (2017-2024 / J300, F800) To replace the cabin filter on the Toyota Rush, open the glove compartment located on the passenger side to release the side retaining pins inside. O…
How to Replace the Key Battery in Your Toyota Rush
How to Replace the Key Battery in Your Toyota Rush
Toyota Rush (2017-2024 / J300, F800) To quickly and easily replace the battery inside the key of your Toyota Rush Mk2, you only need a common flathead screwdriver and a new CR2032 button…
How to Replace the Front Wheel on a Toyota Rush
How to Replace the Front Wheel on a Toyota Rush
Toyota Rush (2017-2024 / J300, F800) In this brief and simple guide, follow the instructions below to replace the front wheel with the spare on your Toyota Rush. First, gather all the ne…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos