Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Toyota RAV4?

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tail light

See other generations:
Video tutorial

Removing the rear light of the second series Toyota RAV4 is a straightforward task. First, gather the necessary tools: a trim removal tool, a flathead screwdriver, a Phillips screwdriver, and a 10 mm socket.

Start by opening the access panel on the side you are working on and remove the side cover to access the back of the light. Using the 10 mm socket, undo the bolt, then extract the bulbs.

Next, remove the trim and the seal of the boot area to access a nut that needs to be undone. At this point, the light is free to be removed from its housing.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light on a Toyota RAV4?
How to Remove the Rear Light on a Toyota RAV4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) As shown in this tutorial, removing the rear light on a Toyota RAV4 to replace a faulty bulb is a very simple and quick task. First, ensure the key i…
How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To correctly replace the headlight bulb of your second generation Toyota RAV4, you need to follow the steps described in this new mini guide. First o…
How to Remove the Headlight Bulbs on a Toyota Rav4
How to Remove the Headlight Bulbs on a Toyota Rav4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and s…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos