Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Toyota RAV4?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Tail light

As shown in this tutorial, removing the rear light on a Toyota RAV4 to replace a faulty bulb is a very simple and quick task. First, ensure the key is not inserted, then open the boot and remove the three securing bolts of the light using a 10 mm socket spanner. Next, grasp the light unit, pull it towards you, and disengage it from the bodywork. At this point, you can proceed with replacing the damaged component. To extract a bulb, turn it slightly anti-clockwise.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear lights in the Toyota RAV4?
How to remove the rear lights in the Toyota RAV4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this tutorial we can see how to disassemble the rear light in the Toyota RAV4, an extremely simple and fast operation. First of all, make sure tha…
How to Remove the Rear Light of the Toyota RAV4?
How to Remove the Rear Light of the Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Removing the rear light of the second series Toyota RAV4 is a straightforward task. First, gather the necessary tools: a trim removal tool, a flathea…
How to Remove the Rear Bumper from a Toyota Rav4?
How to Remove the Rear Bumper from a Toyota Rav4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To remove the rear bumper from a Toyota Rav4, you need to unclip the four securing clips found inside the wheel arches. Inside, there will also be sc…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos