Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Light Bulb on Toyota Rav4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

In this video tutorial, you will see instructions on how to remove and replace the rear brake light bulb on a third-generation Toyota Rav4. First, open the boot and unscrew the fixing screws of the light found on the side; then gently lever the light out. At this point, slightly rotate the bulb holder to remove it along with the bulb; simply remove it and replace it with the correct new one. Once inserted, reassemble the light by applying the reverse procedure!


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light of the Toyota RAV4
Replacing the Rear Light of the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Below are the main instructions for removing and replacing the front light and its bulbs of the Toyota RAV4. First, open the rear tailgate and start …
How to Remove the Rear Lights on a Toyota RAV4?
How to Remove the Rear Lights on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this tutorial, you will learn how to remove the rear lights on a Toyota RAV4, a straightforward task if you need to replace a bulb or the entire u…
How to Replace the Rear Light Bulbs in a Toyota RAV4?
How to Replace the Rear Light Bulbs in a Toyota RAV4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Replacing the rear light bulbs in a Toyota RAV4, as shown in this tutorial, is a very simple operation. Start by ensuring that the key is not inserte…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos