Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment of the Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Glove compartment

Discover how to remove and replace the glove compartment located on the front passenger side of the Toyota Corolla in this brief and simple guide. First, open the front door and access the passenger side; then open the glove compartment and remove the side screws using a cross-head screwdriver, as shown in the video. At this point, disconnect and remove the glove compartment, replacing it with a new one if necessary; finally, reassemble everything by applying the reverse procedure!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Glove Compartment from a Toyota Corolla
Removing the Glove Compartment from a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) This guide provides instructions for removing and replacing the glove compartment on a Toyota Corolla, following these simple steps. First, get insid…
How to disassemble the glove compartment drawer of the Toyota Corolla
How to disassemble the glove compartment drawer of the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Below we will see the procedure for disassembling and replacing the glove compartment drawer of the Toyota Corolla, in simple and quick steps. First …
Replace the Cabin Filter on Toyota Corolla
Replace the Cabin Filter on Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) How to replace the cabin air filter (also known as the pollen filter) on the Toyota Corolla. To perform this simple task, you need to remove the glov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos