Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Toyota Land Cruiser

Model: Toyota Land Cruiser J120, MK 10 - Years 2002-2009
Part: Clock

In this new guide for your Toyota Land Cruiser (2002-2009), discover how to manually adjust the time displayed on the instrument panel. The entire procedure takes only a few seconds and is easy for anyone to perform. Simply follow these steps. First, turn on the ignition and navigate to the central display. Press and hold the "Mode" button for a few seconds and release it when the display shows "Light". Now press "Mode" again and adjust the hours and minutes using the up and down arrows. Finally, press "Mode" to save the changes.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on a Toyota Land Cruiser?
How to set the clock on a Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / J120, MK 10) To set the clock on the Toyota Land Cruiser, turn the key in the ignition barrel to switch on the instrument cluster. Once the cluster is on, use the…
How to know the fuse diagram of a Toyota Land Cruiser
How to know the fuse diagram of a Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / J120, MK 10) The fuse box in a Toyota Land Cruiser vehicle can be found inside the car's cabin, located exactly at the bottom left of the steering wheel. This box…
How do you set the clock on the Toyota Land Cruiser?
How do you set the clock on the Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / J200, MK 11) In order to set the clock of the Toyota Land Cruiser, you need to turn on the instrument panel by inserting the ignition key into the corresponding s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos