Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to restore the Toyota Yaris headlights?

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Headlight

Before starting the procedure let's make sure to apply electrical tape and electrical tape a protective sheet on the bodywork around the lighthouse we are working on. Now let's take some 400 sandpaper and pass it very carefully on the lighthouse abundantly wet with water. We perform circular movements in order to eliminate all the small scratches that may be present on the surface. If the lighthouse is very damaged, we can start with the 600 grit sandpaper and then move on to the finer 400 grit. Once finished we can rinse the lighthouse and apply a polishing product and the protective wax.


Posted on 5 July 2024 by ScegliAuto



How to replace the front headlights in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this tutorial, we can see how to replace the front headlights on the Toyota Yaris, a very simple and quick operation. First of all, make sure that
Where is and how to reach the fuse box of a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) The fuse box of our Toyota Yaris is located inside the dashboard, on the driver's side. To access it, we will need to start by opening the driver's d
Remove the headlights on Toyota Yaris 3
Toyota Yaris (2011-2019 / Xp130) Let's see in this short video how to remove the headlights on a Toyota Yaris third series, following the instructions below. First we open and lift t

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos