Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Rav 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Warning light – error code

In this video tutorial, you can see how to reset the service light on a Toyota Rav 4 by following a few simple steps. First, perform the required maintenance on your vehicle, then replace the parts with new ones and change the oil. Get into your car, engage the handbrake, and press the button to turn on the ignition. Do not touch the pedals during this operation. Near the speedometer, there is a button that you need to press until you see the Trip A message; turn off the ignition, then press the button again to turn on the instrument panel; hold it until the dashes reset. Reset complete.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Toyota RAV 4
How to Reset the Service Light on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the Service light on the Toyota RAV 4, turn on the ignition and navigate through the menu using the controls on the left side of the steerin…
How to reset the Service light on the Toyota RAV 4?
How to reset the Service light on the Toyota RAV 4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) To reset the Service light on the Toyota RAV 4, press and hold the button located on the left side of the instrument panel, just below the speedomete…
How to reset the Service light on a Toyota RAV 4?
How to reset the Service light on a Toyota RAV 4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) To reset the Service light on a Toyota RAV 4, turn on the ignition by turning the key. Once the ignition is on, repeatedly press the button on the le…

    Frequently Asked Questions

    • Rav 4 2006-2013 - What does the Toyota Rav4 P / S warning light mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos