Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota RAV 4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Today's guide is necessary to reset the maintenance light for the oil change on a Toyota RAV 4. First, get inside the vehicle and turn on the ignition; then navigate to the settings in the onboard computer menu using the buttons on the steering wheel, scrolling through the options until you reach the service section, as shown in the video.

At this point, confirm and execute the reset of the engine oil light, then turn off the ignition and start the engine again!


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Toyota RAV 4
Resetting the Service Light on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Today, we will go through the instructions to reset the service indicator on the Toyota RAV 4. First, get inside the vehicle and turn on the instrume…
Resetting the Maintenance Light on a Toyota RAV 4
Resetting the Maintenance Light on a Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Below we will discover the information that will illustrate the procedure to reset the maintenance warning light on a Toyota RAV 4. First, get into t…
Resetting the Service Indicator on the Toyota RAV 4
Resetting the Service Indicator on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) The information below will guide you on how to reset the service light for the regular maintenance oil change on the Toyota RAV 4. First, get inside …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos