Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Cooling Fan Filters of the Toyota Sienta Hybrid nph 170

Model: Toyota Sienta Nph170 - Years 2015-2023

This guide shows how to disassemble and clean the cooling fan filters of the Toyota Sienta nph 170. The filter assembly is located under the driver's seat, so slide the seat all the way forward to create enough space to work. At this point, you can open the protective cover of the filters from the rear passenger seat area, which is held in place by plastic clips. You can now remove the first filter element, which is secured with four clips on the edges. Under this element, there is another filter. These elements can be cleaned with compressed air. Reassemble by reversing the procedure.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Toyota Sienta?
How to Change the Engine Oil in a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) The process to replace degraded engine oil with new oil is almost identical for all cars. For convenience, we will analyze how this is done on a Toyo…
Where is the fuse box located in the Toyota Sienta 2?
Where is the fuse box located in the Toyota Sienta 2?
Toyota Sienta (2015-2023 / Nph170) Thanks to the few simple steps described in this new guide dedicated to all of you who own a second-generation Toyota Sienta, you can locate the fuse…
How to Install a Shark Fin Antenna on the Toyota Sienta?
How to Install a Shark Fin Antenna on the Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) You can install a custom radio antenna, such as a shark fin style, on the roof of the Toyota Sienta. Purchase it from an official dealer or a supplie…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos