Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Shark Fin Antenna on the Toyota Sienta?

Model: Toyota Sienta Nph170 - Years 2015-2023
Part: Antenna

You can install a custom radio antenna, such as a shark fin style, on the roof of the Toyota Sienta. Purchase it from an official dealer or a supplier of good quality products, ensuring it is compatible with your vehicle. Unscrew the old antenna and clean the area around it. Then, connect the new antenna and secure it with the provided screw. Remember to also insert the metal ring to protect the plastic parts. Finally, remove the protective films from the antenna's adhesives and press it onto the vehicle's body.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Factory Radio with an Android Unit in the Toyota Sienta
Replacing the Factory Radio with an Android Unit in the Toyota Sienta
Toyota Sienta (2015-2023 / Nph170) In this guide, follow the steps to remove and replace the factory radio in the Toyota Sienta. First, get inside the vehicle and start by removing the…
How to Replace the Remote Battery in a Toyota Sienta?
How to Replace the Remote Battery in a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) Replacing the remote battery in a Toyota Sienta, as shown in this tutorial, is a very simple and quick operation. You will only need a replacement CR…
How to Change the Battery in a Toyota Sienta?
How to Change the Battery in a Toyota Sienta?
Toyota Sienta (2015-2023 / Nph170) The battery in the Toyota Sienta is located in the engine compartment and is accessible by opening the front hood of the car. You can see it immediat…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos