Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Button on the Toyota Yaris Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

In this video, replace the remote button on the Yaris Aygo. Open the remote and use a micro soldering iron to desolder the old button, gently prying underneath to detach it from the circuit board. Clean the two solder points well, adding some solder and flux for the new soldering.

Open the new button casing and position it over the two terminals to solder the ends to the relevant points. Use tweezers to hold it steady during soldering and apply light pressure around the black button.

Once tested to ensure it works, close the circuit board back in the remote.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on the Toyota Aygo
How to Replace the Key Fob Battery on the Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) The following instructions will guide you on how to disassemble and replace the battery in the key fob of the Toyota Aygo. First, take your key fob a…
How to Replace the Remote Battery of the Toyota Aygo?
How to Replace the Remote Battery of the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) In this tutorial, see how to replace the remote battery of the Toyota Aygo, a very simple and quick operation. You will need a small cross-head screw…
…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos